User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 698
www.energymicro.com
Bit Name Reset Access Description
Select scan sequence conversion resolution.
Value Mode Description
0 12BIT 12-bit resolution
1 8BIT 8-bit resolution
2 6BIT 6-bit resolution
3 OVS Oversampling enabled. Oversampling rate is set in OVSRSEL
3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 ADJ 0 RW Scan Sequence Result Adjustment
Select scan sequence result adjustment.
Value Mode Description
0 RIGHT Results are right adjusted
1 LEFT Results are left adjusted
1 DIFF 0 RW Scan Sequence Differential Mode
Select single ended or differential input.
Value Description
0 Single ended input
1 Differential input
0 REP 0 RW Scan Sequence Repetitive Mode
Enable/disable repetitive scan sequence.
Value Description
0 Scan conversion mode is deactivated after one sequence
1 Scan conversion mode is converting continuously until SCANSTOP is written
28.5.6 ADCn_IEN - Interrupt Enable Register
Offset Bit Position
0x014
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0
0
0
0
Access
RW
RW
RW
RW
Name
SCANOF
SINGLEOF
SCAN
SINGLE
Bit Name Reset Access Description
31:10 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
9 SCANOF 0 RW Scan Result Overflow Interrupt Enable
Enable/disable scan result overflow interrupt.
8 SINGLEOF 0 RW Single Result Overflow Interrupt Enable
Enable/disable single result overflow interrupt.
7:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 SCAN 0 RW Scan Conversion Complete Interrupt Enable
Enable/disable scan conversion complete interrupt.
0 SINGLE 0 RW Single Conversion Complete Interrupt Enable
Enable/disable single conversion complete interrupt.