User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 679
www.energymicro.com
27.5.6 VCMP_IFS - Interrupt Flag Set Register
Offset Bit Position
0x014
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
W1 W1
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 W1 Warm-up Interrupt Flag Set
Write to 1 to set warm-up finished interrupt flag
0 EDGE 0 W1 Edge Triggered Interrupt Flag Set
Write to 1 to set edge triggered interrupt flag
27.5.7 VCMP_IFC - Interrupt Flag Clear Register
Offset Bit Position
0x018
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
W1 W1
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 W1 Warm-up Interrupt Flag Clear
Write to 1 to clear warm-up finished interrupt flag
0 EDGE 0 W1 Edge Triggered Interrupt Flag Clear
Write to 1 to clear edge triggered interrupt flag