User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 678
www.energymicro.com
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 VCMPOUT 0 R Voltage Supply Comparator Output
Voltage supply comparator output value
0 VCMPACT 0 R Voltage Supply Comparator Active
Voltage supply comparator active status.
27.5.4 VCMP_IEN - Interrupt Enable Register
Offset Bit Position
0x00C
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
RW RW
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 RW Warm-up Interrupt Enable
Enable/disable interrupt on finished warm-up.
0 EDGE 0 RW Edge Trigger Interrupt Enable
Enable/disable edge triggered interrupt.
27.5.5 VCMP_IF - Interrupt Flag Register
Offset Bit Position
0x010
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
R R
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 R Warm-up Interrupt Flag
Indicates that warm-up has finished.
0 EDGE 0 R Edge Triggered Interrupt Flag
Indicates that there has been a rising and/or falling edge on the VCMP output.