User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 670
www.energymicro.com
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 R Warm-up Interrupt Flag
Indicates that the analog comparator warm-up period is finished.
0 EDGE 0 R Edge Triggered Interrupt Flag
Indicates that there has been a rising or falling edge on the analog comparator output.
26.5.6 ACMPn_IFS - Interrupt Flag Set Register
Offset Bit Position
0x014
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
W1 W1
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 W1 Warm-up Interrupt Flag Set
Write to 1 to set warm-up finished interrupt flag.
0 EDGE 0 W1 Edge Triggered Interrupt Flag Set
Write to 1 to set edge triggered interrupt flag.
26.5.7 ACMPn_IFC - Interrupt Flag Clear Register
Offset Bit Position
0x018
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0
Access
W1 W1
Name
WARMUP
EDGE
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 WARMUP 0 W1 Warm-up Interrupt Flag Clear
Write to 1 to clear warm-up finished interrupt flag.
0 EDGE 0 W1 Edge Triggered Interrupt Flag Clear
Write to 1 to clear edge triggered interrupt flag.