User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 657
www.energymicro.com
Bit Name Reset Access Description
16 SETIF X RW Set interrupt flag
Set interrupt flag when sensor state equals COMP
15 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
14:12 PRSACT 0xX RW Configure transition action
Configure which action to perform when sensor state equals COMP
DECCTRL_PRSCNT = 0
Mode Value Description
NONE 0 No PRS pulses generated
PRS0 1 Generate pulse on PRS0
PRS1 2 Generate pulse on PRS1
PRS01 3 Generate pulse on PRS0 and PRS1
PRS2 4 Generate pulse on PRS2
PRS02 5 Generate pulse on PRS0 and PRS2
PRS12 6 Generate pulse on PRS1 and PRS2
PRS012 7 Generate pulse on PRS0, PRS1 and PRS2
DECCTRL_PRSCNT = 1
NONE 0 Do not count
UP 1 Count up
DOWN 2 Count down
PRS2 4 Generate pulse on PRS2
UPANDPRS2 5 Count up and generate pulse on PRS2.
DOWNANDPRS2 6 Count down and generate pulse on PRS2.
11:8 NEXTSTATE 0xX RW Next state index
Index of next state to be entered if the sensor state equals COMP
7:4 MASK 0xX RW Sensor mask
Set bit X to exclude sensor X from evaluation.
3:0 COMP 0xX RW Sensor compare value
State transition is triggered when sensor state equals COMP
25.5.26 LESENSE_BUFx_DATA - Scan results (Async Reg)
For more information about Asynchronous Registers please see Section 5.3 (p. 20) .
Offset Bit Position
0x280
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0xXXXX
Access
RW
Name
DATA
Bit Name Reset Access Description
31:16 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
15:0 DATA 0xXXXX RW Scan result buffer