User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 651
www.energymicro.com
Bit Name Reset Access Description
0 CH0 0 W1
Write to 1 to set the CH0 interrupt flag
25.5.20 LESENSE_IEN - Interrupt Enable Register
Offset Bit Position
0x04C
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Access
RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW
Name
CNTOF BUFOF
BUFLEVEL BUFDATAV
DECERR
DEC
SCANCOMPLETE
CH15 CH14 CH13 CH12 CH11 CH10
CH9 CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1 CH0
Bit Name Reset Access Description
31:23 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
22 CNTOF 0 RW
Set to enable interrupt on the CNTOF interrupt flag
21 BUFOF 0 RW
Set to enable interrupt on the BUFOF interrupt flag
20 BUFLEVEL 0 RW
Set to enable interrupt on the BUFLEVEL interrupt flag
19 BUFDATAV 0 RW
Set to enable interrupt on the BUFDATAV interrupt flag
18 DECERR 0 RW
Set to enable interrupt on the DECERR interrupt flag
17 DEC 0 RW
Set to enable interrupt on the DEC interrupt flag
16 SCANCOMPLETE 0 RW
Set to enable interrupt on the SCANCOMPLETE interrupt flag
15 CH15 0 RW
Set to enable interrupt on the CH15 interrupt flag
14 CH14 0 RW
Set to enable interrupt on the CH14 interrupt flag
13 CH13 0 RW
Set to enable interrupt on the CH13 interrupt flag
12 CH12 0 RW
Set to enable interrupt on the CH12 interrupt flag
11 CH11 0 RW
Set to enable interrupt on the CH11 interrupt flag
10 CH10 0 RW
Set to enable interrupt on the CH10 interrupt flag
9 CH9 0 RW
Set to enable interrupt on the CH9 interrupt flag