User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 643
www.energymicro.com
25.5.15 LESENSE_IDLECONF - GPIO Idlephase configuration (Async Reg)
For more information about Asynchronous Registers please see Section 5.3 (p. 20) .
Offset Bit Position
0x038
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
Access
RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW RW
Name
CH15 CH14 CH13 CH12 CH11 CH10
CH9 CH8 CH7 CH6 CH5 CH4 CH3 CH2 CH1 CH0
Bit Name Reset Access Description
31:30 CH15 0x0 RW Channel 15 idlephase configuration
Value Mode Description
0 DISABLE CH15 output is disabled in idle phase
1 HIGH CH15 output is high in idle phase
2 LOW CH15 output is low in idle phase
3 DACCH1 CH15 output is connected to DAC CH1 output in idle phase
29:28 CH14 0x0 RW Channel 14 idlephase configuration
Value Mode Description
0 DISABLE CH14 output is disabled in idle phase
1 HIGH CH14 output is high in idle phase
2 LOW CH14 output is low in idle phase
3 DACCH1 CH14 output is connected to DAC CH1 output in idle phase
27:26 CH13 0x0 RW Channel 13 idlephase configuration
Value Mode Description
0 DISABLE CH13 output is disabled in idle phase
1 HIGH CH13 output is high in idle phase
2 LOW CH13 output is low in idle phase
3 DACCH1 CH13 output is connected to DAC CH1 output in idle phase
25:24 CH12 0x0 RW Channel 12 idlephase configuration
Value Mode Description
0 DISABLE CH12 output is disabled in idle phase
1 HIGH CH12 output is high in idle phase
2 LOW CH12 output is low in idle phase
3 DACCH1 CH12 output is connected to DAC CH1 output in idle phase
23:22 CH11 0x0 RW Channel 11 idlephase configuration
Value Mode Description
0 DISABLE CH11 output is disabled in idle phase
1 HIGH CH11 output is high in idle phase
2 LOW CH11 output is low in idle phase
21:20 CH10 0x0 RW Channel 10 idlephase configuration
Value Mode Description
0 DISABLE CH10 output is disabled in idle phase
1 HIGH CH10 output is high in idle phase