User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 609
www.energymicro.com
Bit Name Reset Access Description
31:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 LTOPBIM 0 W1 Load TOPB Immediately
This bit has no effect since TOPB is not buffered and it is loaded directly into TOP.
0 LCNTIM 0 W1 Load CNT Immediately
Load PCNTn_TOP into PCNTn_CNT on the next counter clock cycle.
24.5.3 PCNTn_STATUS - Status Register
Offset Bit Position
0x008
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0
Access
R
Name
DIR
Bit Name Reset Access Description
31:1 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
0 DIR 0 R Current Counter Direction
Current direction status of the counter. This bit is valid in EXTCLKQUAD mode only.
Value Mode Description
0 UP Up counter mode (clockwise in EXTCLKQUAD mode with the NEDGE bit in
PCNTn_CTRL set to 0)
1 DOWN Down counter mode
24.5.4 PCNTn_CNT - Counter Value Register
Offset Bit Position
0x00C
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0x0000
Access
R
Name
CNT
Bit Name Reset Access Description
31:16 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
15:0 CNT 0x0000 R Counter Value
Gives read access to the counter.