User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 563
www.energymicro.com
Bit Name Reset Access Description
31:3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 COMP1 0 W1 Set Compare match 1 Interrupt Flag
Write to 1 to set the COMP1 interrupt flag
1 COMP0 0 W1 Set Compare match 0 Interrupt Flag
Write to 1 to set the COMP0 interrupt flag
0 OF 0 W1 Set Overflow Interrupt Flag
Write to 1 to set the OF interrupt flag
21.5.7 RTC_IFC - Interrupt Flag Clear Register
Offset Bit Position
0x018
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0
Access
W1 W1 W1
Name
COMP1 COMP0
OF
Bit Name Reset Access Description
31:3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 COMP1 0 W1 Clear Compare match 1 Interrupt Flag
Write to 1 to clear the COMP1 interrupt flag
1 COMP0 0 W1 Clear Compare match 0 Interrupt Flag
Write to 1 to clear the COMP0 interrupt flag
0 OF 0 W1 Clear Overflow Interrupt Flag
Write to 1 to clear the OF interrupt flag
21.5.8 RTC_IEN - Interrupt Enable Register
Offset Bit Position
0x01C
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0
Access
RW RW RW
Name
COMP1 COMP0
OF
Bit Name Reset Access Description
31:3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 COMP1 0 RW Compare Match 1 Interrupt Enable
Enable interrupt on compare match 1
1 COMP0 0 RW Compare Match 0 Interrupt Enable
Enable interrupt on compare match 0
0 OF 0 RW Overflow Interrupt Enable