User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 559
www.energymicro.com
21.3.4 Debugrun
By default, the RTC is halted when code execution is halted from the debugger. By setting the
DEBUGRUN bit in the RTC_CTRL register, the RTC will continue to run even when the debugger is
halted.
21.3.5 Register access
This module is a Low Energy Peripheral, and supports immediate synchronization. For description
regarding immediate synchronization, the reader is refered to Section 5.3.1.1 (p. 21) .