User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 554
www.energymicro.com
Bit Name Reset Access Description
0 DTPRS0F 0 R DTI PRS 0 Fault
This bit is set to 1 if a PRS 0 fault has occurred and DTPRS0FEN is set to 1. The TIMER0_DTFAULTC register can be used to
clear fault bits.
20.5.21 TIMERn_DTFAULTC - DTI Fault Clear Register
Offset Bit Position
0x084
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0
0
0
0
Access
W1
W1
W1
W1
Name
TLOCKUPFC
DTDBGFC
DTPRS1FC
DTPRS0FC
Bit Name Reset Access Description
31:4 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
3 TLOCKUPFC 0 W1 DTI Lockup Fault Clear
Write 1 to this bit to clear core lockup fault.
2 DTDBGFC 0 W1 DTI Debugger Fault Clear
Write 1 to this bit to clear debugger fault.
1 DTPRS1FC 0 W1 DTI PRS1 Fault Clear
Write 1 to this bit to clear PRS 1 fault.
0 DTPRS0FC 0 W1 DTI PRS0 Fault Clear
Write 1 to this bit to clear PRS 0 fault.
20.5.22 TIMERn_DTLOCK - DTI Configuration Lock Register
Offset Bit Position
0x088
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0x0000
Access
RW
Name
LOCKKEY
Bit Name Reset Access Description
31:16 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
15:0 LOCKKEY 0x0000 RW DTI Lock Key
Write any other value than the unlock code to lock TIMER0_ROUTE, TIMER0_DTCTRL, TIMER0_DTTIME and TIMER0_DTFC from
editing. Write the unlock code to unlock. When reading the register, bit 0 is set when the lock is enabled.
Mode Value Description
Read Operation
UNLOCKED 0 TIMER DTI registers are unlocked
LOCKED 1 TIMER DTI registers are locked