User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 546
www.energymicro.com
Bit Name Reset Access Description
31:16 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
15:0 CNT 0x0000 RWH Counter Value
These bits hold the counter value.
20.5.11 TIMERn_ROUTE - I/O Routing Register
Offset Bit Position
0x028
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0x0
0
0
0
0
0
0
Access
RW
RW
RW
RW
RW
RW
RW
Name
LOCATION
CDTI2PEN
CDTI1PEN
CDTI0PEN
CC2PEN
CC1PEN
CC0PEN
Bit Name Reset Access Description
31:19 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
18:16 LOCATION 0x0 RW I/O Location
Decides the location of the CC and CDTI pins.
Value Mode Description
0 LOC0 Location 0
1 LOC1 Location 1
2 LOC2 Location 2
3 LOC3 Location 3
4 LOC4 Location 4
5 LOC5 Location 5
15:11 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
10 CDTI2PEN 0 RW CC Channel 2 Complementary Dead-Time Insertion Pin Enable
Enable/disable CC channel 2 complementary dead-time insertion output connection to pin.
9 CDTI1PEN 0 RW CC Channel 1 Complementary Dead-Time Insertion Pin Enable
Enable/disable CC channel 1 complementary dead-time insertion output connection to pin.
8 CDTI0PEN 0 RW CC Channel 0 Complementary Dead-Time Insertion Pin Enable
Enable/disable CC channel 0 complementary dead-time insertion output connection to pin.
7:3 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
2 CC2PEN 0 RW CC Channel 2 Pin Enable
Enable/disable CC channel 2 output/input connection to pin.
1 CC1PEN 0 RW CC Channel 1 Pin Enable
Enable/disable CC channel 1 output/input connection to pin.
0 CC0PEN 0 RW CC Channel 0 Pin Enable
Enable/disable CC Channel 0 output/input connection to pin.