User manual
...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 514
www.energymicro.com
Bit Name Reset Access Description
Write to 1 to set the RXOF interrupt flag.
2:1 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
0 TXC 0 W1 Set TX Complete Interrupt Flag
Write to 1 to set the TXC interrupt flag.
19.5.14 LEUARTn_IFC - Interrupt Flag Clear Register
Offset Bit Position
0x034
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Reset
0
0
0
0
0
0
0
0
0
Access
W1
W1
W1
W1
W1
W1
W1
W1
W1
Name
SIGF
STARTF
MPAF
FERR
PERR
TXOF
RXUF
RXOF
TXC
Bit Name Reset Access Description
31:11 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
10 SIGF 0 W1 Clear Signal-Frame Interrupt Flag
Write to 1 to clear the SIGF interrupt flag.
9 STARTF 0 W1 Clear Start-Frame Interrupt Flag
Write to 1 to clear the STARTF interrupt flag.
8 MPAF 0 W1 Clear Multi-Processor Address Frame Interrupt Flag
Write to 1 to clear the MPAF interrupt flag.
7 FERR 0 W1 Clear Framing Error Interrupt Flag
Write to 1 to clear the FERR interrupt flag.
6 PERR 0 W1 Clear Parity Error Interrupt Flag
Write to 1 to clear the PERR interrupt flag.
5 TXOF 0 W1 Clear TX Overflow Interrupt Flag
Write to 1 to clear the TXOF interrupt flag.
4 RXUF 0 W1 Clear RX Underflow Interrupt Flag
Write to 1 to clear the RXUF interrupt flag.
3 RXOF 0 W1 Clear RX Overflow Interrupt Flag
Write to 1 to clear the RXOF interrupt flag.
2:1 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
0 TXC 0 W1 Clear TX Complete Interrupt Flag
Write to 1 to clear the TXC interrupt flag.