User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 445
www.energymicro.com
Bit Name Reset Access Description
10:8 LOCATION 0x0 RW I/O Location
Decides the location of the I
2
C I/O pins.
Value Mode Description
0 LOC0 Location 0
1 LOC1 Location 1
2 LOC2 Location 2
3 LOC3 Location 3
4 LOC4 Location 4
5 LOC5 Location 5
6 LOC6 Location 6
7:2 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
1 SCLPEN 0 RW SCL Pin Enable
When set, the SCL pin of the I
2
C is enabled.
0 SDAPEN 0 RW SDA Pin Enable
When set, the SDA pin of the I
2
C is enabled.