User manual

...the world's most energy friendly microcontrollers
2012-04-24 - Giant Gecko Family - d0053_Rev0.96 44
www.energymicro.com
Bit Name Reset Access Description
When set, the last erase or write is aborted due to erase/write access constraints
0 BUSY 0 R Erase/Write Busy
When set, an erase or write operation is in progress and new commands are ignored
7.5.8 MSC_IF - Interrupt Flag Register
Offset Bit Position
0x02C
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0
Access
R R R R
Name
CMOF CHOF
WRITE ERASE
Bit Name Reset Access Description
31:4 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
3 CMOF 0 R Cache Misses Overflow Interrupt Flag
Set when MSC_CACHEMISSES overflows
2 CHOF 0 R Cache Hits Overflow Interrupt Flag
Set when MSC_CACHEHITS overflows
1 WRITE 0 R Write Done Interrupt Read Flag
Set when a write is done
0 ERASE 0 R Erase Done Interrupt Read Flag
Set when erase is done
7.5.9 MSC_IFS - Interrupt Flag Set Register
Offset Bit Position
0x030
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1 0
Reset
0 0 0 0
Access
W1 W1 W1 W1
Name
CMOF CHOF
WRITE ERASE
Bit Name Reset Access Description
31:4 Reserved
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
3 CMOF 0 W1 Cache Misses Overflow Interrupt Set
Set the CMOF flag and generate interrupt
2 CHOF 0 W1 Cache Hits Overflow Interrupt Set
Set the CHOF flag and generate interrupt
1 WRITE 0 W1 Write Done Interrupt Set
Set the write done bit and generate interrupt