Instruction Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Radio Board Connector
- 3. Radio Board Block Summary
- 4. RF Section
- 5. Mechanical Details
- 6. EMC Compliance
- 7. RF Performance
- 8. EMC Compliance Recommendations
- 9. Board Revision History
- 10. Errata
- 11. Document Revision History
1. Introduction
The BRD4186C Radio Boards provide a development platform (together with the Wireless Starter Kit Mainboard or the Wireless Pro Kit
Mainboard) for the Silicon Labs EFR32MG24 Wireless System-on-Chips and serve as reference designs for the matching network of
the RF interface.
The BRD4186C Radio Board is designed to operate in the 2400-2483.5 MHz band with the RF matching network optimized for operat-
ing at 10 dBm output power.
To develop and/or evaluate the EFR32 Wireless Gecko, the BRD4186C Radio Board can be connected to the Wireless Starter Kit
Mainboard or the Wireless Pro Kit Mainboard to get access to debug interface, Virtual COM port, packet trace, display, buttons, LEDs,
and additional features from expansion boards, and also to evaluate the performance of the RF interface.
BRD4186C Reference Manual
Introduction
silabs.com | Building a more connected world. Rev. 1.0 | 4