Instruction Manual
Table Of Contents
- Table of Contents
- 1. Introduction
- 2. Radio Board Connector
- 3. Radio Board Block Summary
- 4. RF Section
- 5. Mechanical Details
- 6. EMC Compliance
- 7. RF Performance
- 8. EMC Compliance Recommendations
- 9. Board Revision History
- 10. Errata
- 11. Document Revision History
8. EMC Compliance Recommendations
8.1 Recommendations for 2.4 GHz ETSI EN 300-328 Compliance
As shown in section 7.2 Radiated Power Measurements, the power of the BRD4186C fundamental with 10 dBm output is compliant
with the 20 dBm limit of the ETSI EN 300-328 regulation. With the supported modulation schemes, the harmonics are also compliant
with the relevant limits. Although the BRD4186C Radio Board has an option for mounting a shielding can, it is not required for compli-
ance.
8.2 Recommendations for 2.4 GHz FCC 15.247 Compliance
As shown in section
7.2 Radiated Power Measurements, the power of the BRD4186C fundamental with 10 dBm output is compliant
with the 30 dBm limit of the FCC 15.247 regulation. With the supported modulation schemes, the harmonics are also compliant with the
relevant limits. Although the BRD4186C Radio Board has an option for mounting a shielding can, it is not required for compliance.
BRD4186C Reference Manual
EMC Compliance Recommendations
silabs.com | Building a more connected world. Rev. 1.0 | 15