User's Guide
Table Of Contents
- 2 Introduction
- 3 Firmware
- 4 Quick Start
- 5 Operating Modes
- 6 Hardware
- 7 Contacts
- 8 Disclaimers
- 8.1 FCC Interference Statement (Part 15.105 (b))
- 8.2 FCC Part 15 Clause 15.21
- 8.3 FCC Part 15.19(a) [interference compliance statement], unless the following statement is already provided on the device label
- 8.4 ISED RSS-Gen Notice
- 8.5 FCC RF Exposure Guidance Statement
- 8.6 ISED RF Exposure Guidance Statement
- 9 Version History
BAT-X
5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620
P: +1 (949) 748-8895
E: info@mobilogix.com
© MOBILOGIX, INC.
5.2 DISCOVERY MODE
Discovery Mode is an ultra-low-power mode where BAT-X acts as a Bluetooth beacon. Since no tracking is possible in
Discovery Mode it can be used to conserve battery during periods of inactivity.
Entry Triggers:
• Normal Mode to Discovery Mode: REST API
Exit Triggers:
• Discovery Mode to Normal Mode: Write operation via Bluetooth
Available Functions:
• BT OTA
• BT Advertising
Radio Modes:
• Cellular (BG96): Off
• Bluetooth (BG13): Bluetooth advertising
5.3 FACTORY MODE
BAT-X shall be configured in Factory Mode from factory production line. Factory Mode can be used for extended storage and
long (untracked) transport of BAT-X. The only exit trigger for Factory Mode requires physical access to BAT-X for charging.
Entry Triggers:
• Normal Mode to Factory Mode: FOTA
Exit Triggers:
• Factory Mode to Normal Mode: Charge for 10 minutes
Available Functions:
• No functions are available while in Factory Mode, all radios are off.
Radio Modes:
• Cellular (BG96): Off
• Bluetooth (BG13): Off