User's Guide
Table Of Contents
- 2 Introduction
- 3 Firmware
- 4 Quick Start
- 5 Operating Modes
- 6 Hardware
- 7 Contacts
- 8 Disclaimers
- 8.1 FCC Interference Statement (Part 15.105 (b))
- 8.2 FCC Part 15 Clause 15.21
- 8.3 FCC Part 15.19(a) [interference compliance statement], unless the following statement is already provided on the device label
- 8.4 ISED RSS-Gen Notice
- 8.5 FCC RF Exposure Guidance Statement
- 8.6 ISED RF Exposure Guidance Statement
- 9 Version History
BAT-X
5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620
P: +1 (949) 748-8895
E: info@mobilogix.com
© MOBILOGIX, INC.
5 OPERATING MODES
5.1 NORMAL MODE
Normal Mode will allow BAT-X to go between sleeping and active work states to report data to the cloud. Active work states
are triggered by hold-off timers and threshold values according to the BAT-X configuration.
Entry Triggers:
• Factory Mode to Normal Mode: Charge for 10 minutes
• Discovery Mode to Normal Mode: Write operation via Bluetooth
Exit Triggers:
• Normal Mode to Discovery Mode: REST API
• Normal Mode to Factory Mode: FOTA
Available Functions:
• Normal Reporting:
o Login
o Location Data
o Sensor Data
o Beacon Report
• Alarm Reporting:
o Lux
o Movement
o Impact/Drop
• Configuration
• FOTA
Radio Modes:
• Cellular (BG96): Follows configured settings for wake/sleep
• Bluetooth (BG13): Scanning for beacons