Data Sheet

UZB-7 Z-Wave Controller
User Manual
silabs.com | Building a more connected world. Rev 0.30
Frequency Allocation
Table 1. Frequencies Allocation
Region US EU Australia
New Zealand
Japan Korea
Model UZB-7
Firmware Z-Wave 7.00
Data Rate 9.6 kbps / 40 kbps / 100 kbps 100 kbps
Number of Channels 2 / 3
Frequency 908.42 MHz
908.40 MHz
916.00 MHz
868.42 MHz
868.40 MHz
869.85 MHz
921.42 MHz
921.40 MHz
919.80 MHz
922.50 MHz
923.90 MHz
926.30 MHz
920.90 MHz
923.90 MHz
926.30 MHz
Max. Power -1 dBm 13 dBm 12 dBm 0dBm 13dBm
Quick Start Up
Here is a Quick Start Up guide to get UZB-7 to work with Z-Wave PC Controller. The Z-Wave PC Controller is a PC
application software tool enable communications to Z-Wave nodes such as switches and sensors.
1. Connect UZB-7 to your computer
2. Install the Virtual COM Port (VCP) drivers UZB-7, CP201x UART-to-USB Driver, CP210x VCP Driver.
The latest drivers are available at www.silabs.com/interface-software.
3. Install and Run Z-Wave PC Controller from Simplicity Studio
4. Click on the “Setting-wheel” on Right-Top corner of PC Controller and select “Silicon Labs CP210x USB to
UART Bridge”. Click OK