Specifications

AN93
Rev. 0.9 209
Note that the delay times shown may be very short and do not include the time to empty the UART's potentially
long TX buffer. The time quoted is between the end of transmission of the last char of a line and the start of
transmission of the first char of the next line.
Table 113. Load Techniques and Speeds
Start
Condition:
Delay
Between
Lines
Load Time (sec)
for a 6235 Byte
Patch
(at 115 kBaud)
Approach Used With:
RESET then
ATE0 &
ATQ1
0.5 ms 0.694 Embedded Systems
1.0 ms 0.771 "
2.0 ms 0.925 "
5.0 ms 1.385 "
10.0 ms 2.152 "
RESET
Wait for
OK/CR/LF
3.998
Windows or Embedded Sys-
tem where time precision is
poorer than 10 ms.
RESET
100.0 ms
15.962
Windows Hyper Terminal
App with a 100 ms line
delay..