User`s guide

C8051F34x-DK
4 Rev. 0.1
5.4.2. Building and Downloading the Program for Debugging
1. Once all source files have been added to the target build, build the project by clicking on the Build/Make
Project button in the toolbar or selecting Project->Build/Make Project from the menu.
Note: After the project has been built the first time, the Build/Make Project command will only build the
files that have been changed since the previous build. To rebuild all files and project dependencies, click
on the Rebuild All button in the toolbar or select Project->Rebuild All from the menu.
2. Before connecting to the target device, several connection options may need to be set. Open the
Connection Options window by selecting Options->Connection Options... in the IDE menu. First, select
the adapter that was included with the kit in the “Serial Adapter” section. Next, the correct “Debug Interface”
must be selected.
C8051F34x family devices use the Silicon Labs 2-wire (C2) debug interface. Once all the
selections are made, click the OK button to close the window.
3. Click the
Connect button in the toolbar or select Debug->Connect from the menu to connect to the device.
4. Download the project to the target by clicking the Download Code button in the toolbar.
Note: To enable automatic downloading if the program build is successful select Enable automatic con-
nect/download after build in the Project->Target Build Configuration dialog. If errors occur during the
build process, the IDE will not attempt the download.
5. Save the project when finished with the debug session to preserve the current target build configuration,
editor settings and the location of all open debug views. To save the project, select Project->Save Project
As... from the menu. Create a new name for the project and click on Save.