User's Guide

Linde Bluetooth USB Stick User Guide

Preparations

Issued on 13. September 2018 by Florian Baumgartl

Revision 1.0

2. Preparations

1.2. Windows Driver(s)

By default Windows will recognize the Linde Bluetooth USB Stick as Silicon Labs CP210x

USB to UART Bridge. Please make sure to use the latest driver version which can be found

under https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-

vcp-drivers.

1.3. GNU/Linux Driver(s)

Most GNU/Linux distributions will already provide all required driver(s) in the standard

installation which are implemented in the official Linux Kernel:

# cat /var/log/syslog

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.637172] usb 1-2: new full-speed USB device number 3

using xhci_hcd

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.982192] usb 1-2: New USB device found,

idVendor=10c4, idProduct=ea60

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.982194] usb 1-2: New USB device strings: Mfr=1,

Product=2, SerialNumber=3

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.982195] usb 1-2: Product: CP2102N USB to UART Bridge

Controller

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.982196] usb 1-2: Manufacturer: Silicon Labs

Aug 20 15:46:36 m2m-Ubuntu kernel: [23097.982197] usb 1-2: SerialNumber: 0001

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.039491] usbcore: registered new interface driver

usbserial_generic

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.039733] usbserial: USB Serial support registered for

generic

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.041626] usbcore: registered new interface driver

cp210x

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.041839] usbserial: USB Serial support registered for

cp210x

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.041894] cp210x 1-2:1.0: cp210x converter detected

Aug 20 15:46:37 m2m-Ubuntu kernel: [23098.047271] usb 1-2: cp210x converter now attached to

ttyUSB0

# lsmod | grep cp210x

cp210x 11238 0

usbserial 33357 1 cp210x