User's Manual

Blue-1000 Quick-Start-Guide
This document describes the first steps to bring your Blue-1000 USB Stick into operation. For
further questions please ask at [e-mail].
Functional principle
The Blue-1000 is recognized as a standard USB serial device by your operating System.
Microsoft Windows will add a new COM port and Linux based systems will show the device
as /dev/ttyUSBx. Thanks to the integrated Bluegiga iWRAP firmware you do not depend on the
Bluetooth stack of your OS. Instead you can communicate to your Bluetooth devices directly
over this virtual serial port.
Drivers
Generally the device should be recognized as „Silicon Labs CP210x USB to UART Bridge“ and
linked in your system automatically.
Microsoft Windows:
The first time you connect the USB device to your host you'll be asked if the Windows Update
System shall search the Internet for known drivers. If you confirm that, the driver should be
installed automatically.
m2m Germany GmbH
Rudolf-Diesel-Str. 7
D-61273 Wehrheim
Germany
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
Web: www.m2mgermany.de
,
Ihr Produktberater:
Michael Nickolai
Phone: [phone]
Email: [e-mail]