User's Manual

Bluegiga Technologies Oy
Page 64 of 71
14 Certifications
WT32 is compliant to the following specifications.
14.1 Bluetooth
WT32 module is Bluetooth qualified and listed as an end product. If not modified in any way, it is a complete
Bluetooth entity, containing software and hardware functionality as well as the whole RF-part including the
antenna. This practically translates to that if the module is used without modification of any kind, it does not
need any Bluetooth approval work. If changes are made in the parameter set, added profiles or in the antenna
design, it is required to be submitted to a BQB (Bluetooth Qualification Body) for evaluation on what needs to
be tested.
With HCI firmware WT32 will not meet the requirements of end product qualification.
WT32 is Bluetooth compliant to the following specifications
RF as defined in Part A of the Bluetooth specification v2.0+EDR, Vol.2 Core System Package [Controller
volume] (Class 1 operation) with all optional and mandatory features supported.
BB as defined in Part B of the Bluetooth specification v2.0+EDR, Vol.2 Core System Package [Controller
volume], and specified in the covered functionality of the Software Integrated Component (Bluetooth ID:
B012319)
LM as defined in Part C of the Bluetooth specification v2.0+EDR, Vol.2 Core System Package [Controller
volume], and specified in the covered functionality of the Software Integrated Component (Bluetooth ID:
B012319)
L2CAP as defined in Part A of the Bluetooth specification v2.0+EDR, Vol.3 Core System Package [Controller
volume], and specified in the covered functionality of the Software Integrated Component (Bluetooth ID:
B012319)
SDP as defined in Part B of the Bluetooth specification v2.0+EDR, Vol.3 Core System Package [Controller
volume], and specified in the covered functionality of the Software Integrated Component (Bluetooth ID:
B012319)
RFCOMM as defined in PART F:1 of the Bluetooth Core Specification v1.1 and specified in the covered
functionality of the Software Integrated Component (Bluetooth ID: B012319).
Generic Access GAP as defined in PART C of the Bluetooth Core Specification v2.0+EDR, Vol.3 Core
Systems Package [Host Volume], and specified in the covered functionality of the Software Integrated
Component (Bluetooth ID: B012319).
Serial Port Profile (SPP) as defined in PART K:5 of the Bluetooth Profile Specification v1.1, and specified in
the covered functionality of the Software Integrated Component (Bluetooth ID: B012319).
Bluetooth EPL:
https://www.bluetooth.org/tpg/EPL_Detail.cfm?ProductID=6102
Bluetooth QDID: B014372