User's Manual

Team2 SW Help
• To change transmitter's mode select the player from the list, open Transmitter tab, select
correct radio button (Online or Off-season) and click the Transfer button. Selected
transmitter settings can be transferred to all transmitters at once by clicking the Transfer
to all button.
• Off-season mode has two additional settings. These settings are enabled when Off-
season is selected.
• The Recording rate setting has two options, Every beat and Every 5 seconds.
This setting affects memory capacity.
• When Every beat is selected, the transmitter can record data up to 48
hours.
• When Every 5 seconds is selected, the transmitter can record data up
to 360 hours.
• Second setting enables you to select which data is overwritten when the memory
is full. The options are Oldest files and Only files transferred to the PC.
• When Oldest files is selected, the memory cannot ever become full, but
at the same time data may be lost if it's not transferred to PC.
• When Only files transferred to the PC is selected, the memory can
become full, but no data is lost because only transferred data is
overwritten.
• NOTE: In order to change transmitter settings, transmitters must be inserted into the
charger and connected to the system. When player is selected from the list, the software
indicates in the Transmitter tab whether or not the transmitter is connected to the system.
See also more information on Online and off-season modes
.
NOTE: After you have introduced secondary base stations (one or two) to the system, you will
have to synchronize the transmitters with the new base station combination. See instructions in
How to synchronize transmitters with new base stations
. There are yellow triangles in the
Transmitters tab if synchronization is required. To find out the reason for the yellow triangle, take
the mouse cursor on the symbol and a tooltip message is displayed.
Polar Training Computer
In the Polar Training Computer tab you can transfer data from the Polar training computer to the
PC and vice versa. The data transfer between the PC and the Polar training computer is done by
using infrared connection. You need either a built-in infrared port or Polar IrDA USB adapter on
your PC to transfer data. For example, the following Polar training computers are compatible with
50