User's Manual

Team2 SW Help
2. Select Start (> Settings) > Control Panel.
3. Double-click the Bluetooth Devices icon
to open the device settings.
4. Open the Options tab.
5. Check the Turn discovery on check-box.
6. Save changes and close the window by selecting OK.
NOTE: When you are not using the USB dongle, you can turn discovery off by un-checking the
box in the settings.
How to replace main base station
You may need to replace the current main base station, for example if the current main base
station is broken. You may replace the current main base station with a secondary or a new base
station. Follow the steps below to replace the current main base stations with another base
station.
Remove the current main base station from the system:
1. Open software preferences (Tools > Preferences) and select the Base station/USB
dongle tab.
2. Select the main base station from the base station list.
3. Click Remove below the base station list. The whole base station list is cleared.
Reset the base stations:
1. Switch on the first base station, do not connect it with the PC. Make sure the other base
stations are switched off.
2. Wait until light (1) is lit on the base station.
3. Push the reset button on the base station front panel
with a pen or pencil. The reset
button can be found under the plug.
4. Switch off the reset base station and switch on the second one. Repeat steps 1-3 until all
the base stations are reset.
Introduce the new base station:
30