User's Manual

Team2 SW Help
• When the transmitter is inserted correctly into the charger the red led is on for 5 seconds.
At the same time you can here a short sound.
How to introduce additional base stations
The base station you introduced to the system first (during or after Wizard
) is your main base
station. In order to use more than 28 transmitters simultaneously online, the secondary base
stations must be introduced to the Team
2
system. Additional base stations can be purchased as
accessories.
It is recommended that the additional base stations are introduced to the Team
2
system using the
Ethernet cable (wired connection).
1. Make sure the main base station is introduced to the system: go to software preferences
(Tools > Preferences > Base station/USB dongle tab). The main base station should
be on the base station list. If you want to change base station settings (name or wireless
network key), do it before introducing the secondary base stations.
2. Switch the main base station off. Keep the Team
2
software running.
3. Connect the PC and the first secondary base station with the Ethernet cable.
4. Switch the secondary base station on.
26