User's Manual

Team2 SW Help
system one by one with the Add
New Transmitter feature.
Do this as follows:
• Insert only the first (e.g.
transmitter with a label
11) into the charger.
• Add the transmitter to the
system, it will
automatically be
numbered as 11.
• Insert only the second
(e.g. transmitter with a
label 12) into the charger.
• Add the transmitter to the
system, it will
automatically be
numbered as 12.
• Repeat until you have
added all the labelled
transmitters to the
system.
The number label has come off and
you don't know which transmitter it
is.
1) If only one transmitter doesn't
have a label, check the rest of the
transmitters' labels. The number
that is missing is the transmitter's
number.
2) If there are two or more
transmitters without a label, insert
them one by one into the charger
(one at a time). Open Tools >
Preferences > Transmitters tab.
Wait until the transmitter is
connected to the system. Find out
which transmitter is marked as
connected in the transmitter list.
Repeat this until you know the
154