User's Manual

Team2 SW Help
zone is 0. than 0.
There is not Remove button in the
rear of the sport zone.
Sport zone in question is the original
sport zone.
Original sport zones cannot be
removed.
Training computer
Below you can find help to some common problems with training computer usage with Team
2
system.
Problem Cause Solution
The heart rate does not display on
the training computer screen.
1) Your Polar training computer is
not compatible with Team
2
transmitters.
2) Your Polar training computer is
not in training mode.
1) For example, the following Polar
training computers can be used with
Team
2
transmitter: RS400, RS300X,
AXN500 and AXN700. Full list of
compatible training computers can
be found at Polar website
.
2) Set your training computer in
training mode. Usually, it is done by
pressing the RED button twice. For
more information, see the user
manual of your Polar product.
The transmitter number does not
display on the training computer
screen.
1) The transmitter number has not
been transferred to the training
computer.
2) The transmitter number has not
set to be displayed on the screen.
1) See the instructions in How to
transfer data between PC and
training computer.
2) In Time view, long-press the
upper right button.
Transfer
Below you can find help to some common problems with transfers.
150