User's Manual

Team2 SW help
5. Click Remove button. The transmitter is removed without confirmation!
6. Repeat steps 4 and 5 if necessary.
See also How to add transmitters
.
PDA software
Introduction to PDA Software
The PDA and Team
2
PDA software liberates you as a trainer to monitor players' heart rates
effortlessly during training. Team
2
PDA software offers few essential Online Training features.
Heart rates, sport zones and training loads can be monitored in a list or grid view. You can
monitor all the players or only a few players at a time. The PDA enables online monitoring with a
small-sized device without a PC!
It is easy to start up the Team
2
PDA software and it is easy to use. Mobile online monitoring is
only a few steps away once the Team
2
PC software has been taken into use:
1. Connect the PDA to PC according to the instructions provided with the PDA. To
synchronize information between your PC and the PDA, make sure you have all the
necessary software
(*)
installed on your computer.
2. Install
the Team2 PDA software.
3. Sync your teams to the PDA via the Team
2
PC software.
4. Connect the PDA to the Team
2
base station with a wireless connection. See How to
establish wireless connection.
5. Monitor training online. See How to start online monitoring
.
NOTE: PDA device is not provided in Team
2
set. Contact your local IT dealer to purchase one.
Team
2
PDA software is only available in English.
(*)
If you are using Windows XP, you need to have Microsoft ActiveSync installed, and if you are
using Windows Vista, you need to have Windows Mobile Device Center installed.
If you need general instructions on how to use PDA device, see the PDA device's manual.
PDA Requirements
The Team
2
PDA software requires that the PDA device fulfills the following minimum
requirements:
121