User's Manual

Team2 SW help
• When Sport zones is checked, the sport zone settings are transferred to the training
computer.
• When Polar Team
2
transmitter number (Time view) is checked, the selected player's
transmitter number is transferred to the training computer. The transmitter number can be
set to be displayed on the screen of the training computer in Time view by long-pressing
the upper right button.
1. If you are using a separate infrared adapter, plug it into your PC.
2. Open Team
2
software, select a team and open Team Properties.
3. Go to the Polar Training Computer tab (Players > Polar Training Computer), and
select the information you want to transfer (date and time, person information, personal
values, sport zones, or transmitter number).
4. Select a player from the player list on the left.
5. Set your Polar training computer into connect mode and place it in front of the infrared
port. See the user manual of your Polar product to get support in setting the training
computer into connect mode.
6. Click Transfer button from the Team
2
software to begin the transfer.
7. Polar Training Computer settings updated successfully is displayed when the
transfer is successfully completed.
How to Transfer Data from Transmitters' Memory
After online training or off-season period (for example, independent training period), the training
data can be transferred from the transmitters' memory to the PC.
NOTE: Online training data can also be completed by using this feature. Completion can be
needed, for example, if there are gaps in the training data. Use cases:
• There were connection problems between the base station and the PC.
• There were connection problems between the transmitter(s) and the base station (the
transmitter was out of the base station's range).
117