User Manual

SET
Variable Description
BLUETOOTH AUTH bdaddr pin
{authflags}
This command sets the PIN code for bdaddr.
Authflags are:
--NEWPAIR Only if we do not have linkkey yet
--REQUEST Request this PIN from remote, do not re-
ply with this one
--REPLY Reply to remote requests with this PIN
--CALL Only if making an outgoing call
--ANSWER Only when answering to an incoming call
--RFCOMM Call type is RFCOMM (includes
FORK/PPP/...)
--BNEP Call type is BNEP
--L2CAP Call type is L2CAP
Default authflags are all enabled, except for --
NEWPAIR.
There are three special PINs:
- Reject without asking PIN.
-- Reject on the connection open, do not check for call
types.
+ Accept without asking PIN.
BLUETOOTH PAIR bdaddr linkkey With this command, you can manually set the linkkey
for bdaddr.
Note: SET BLUETOOTH AUTH must also be set for a
value to enable encrypted connections with previously
stored link keys.
BLUETOOTH PAIR bdaddr With this command, you can manually delete the
linkkey for bdaddr.
BLUETOOTH PAIREXPIRE seconds With this command, you can set the expiration time, in
seconds, for pairing information.
75