User Manual

SET
Variable Description
BLUETOOTH PAGEMODE mode
{page_timeout
{page_repetition_mode
{scan_activity_interval
scan_activity_window
{inquiry_activity_interval
inquiry_activity_window}}}}
Pagemode defines whether other devices can find and
call you. There are four different modes:
0: No inquiry, no paging
1: Inquiry, no paging
2: No inquiry, paging
3: Inquiry and paging
The page timeout is given in hex and the default value
is 2000. The default page repetition mode is 2 (R2). The
default scan activity is interval 0800 and window 0012
(R1). The default inquiry activity is interval 0800 and
window 0012 (R1).
See the Bluetooth Specification for more information on
these parameters.
BLUETOOTH AUTOHIDE physical
logical
This command automatically hides the baseband (sets
pagemode to 0) if there are more physical ACL links
or logical connections than defined. Value 0 means
"don’t care".
Default values: 7 0
BLUETOOTH AUTH * {authflags} This command removes the default PIN code. If you
are making an outgoing connection and the remote
end asks for the PIN, "1234" will be sent.
BLUETOOTH AUTH * pin
{authflags}
This command sets the default PIN code.
BLUETOOTH AUTH bdaddr
{authflags}
This command removes the PIN code for bdaddr.
74