User Manual

Appendix B. Setup Options
8. Bluetooth address of the remote device [00:07:80:80:bf:01]
The Bluetooth address of the device to be contacted. If the local device
is configured as DevA, this is the DevB it tries to connect.
9. Service channel [2]
In DevA (call) mode: The Bluetooth RFCOMM channel of the remote device.
In DevB (answer) mode: The Bluetooth RFCOMM channel of the local device.
10. Service name (shown in SDP) [Serial Port]
The name of the Bluetooth Serial Port Profile service shown in the Service
Discovery.
11. Optional command line parameters []
Optional extra parameters for the Access Server Serial Port profile
application. Currently the supported parameters are:
--device dev Device, if not the user port (/dev/ttyS0 for CF Card)
--msc Enables transmitting of DCD/DSR Modem Status Control signals.
--nobuffer Discard data if no Bluetooth connection, do not buffer it.
B.5.1.6. Object push profile settings
This submenu contains Bluetooth Object Push Profile settings.
1. Service name (shown in SDP) [Object Push]
The name of the Object Push Profile service shown in the Service Discovery.
B.5.1.7. File tranfer profile settings
This submenu contains Bluetooth File Transfer Profile settings.
1. Service name (shown in SDP) [File Transfer]
The name of the File Transfer Profile shown in the Service Discovery.
B.6. Advanced settings
Submenu containing advanced settings of Access Server.
1. System startup script [/etc/rc.d/rc.local]
This is the last initialization script executed at system startup.
By default, the script /etc/rc.d/rc.local just turns off all LEDs to
indicate the startup has finished. If you want to initialize something
automatically at every boot, or start up your own applications,
you should add the required commands to this file.
Remember to start your programs to the background. Example:
/usr/local/bin/myapp &
If you do not start the programs to the backgroud, you will not able
to access the management console using a serial cable.
2. Default user profile [/etc/profile]
151