User Manual

Appendix B. Setup Options
"Sniff: Idle" means that a connection is switched to sniff mode after
it has not transmitted data for some time (2 seconds by default).
When data transmission resumes, switch to active mode is made.
Park modes are generally not useful. See User’s and Developer’s Guide
and Bluetooth specification for more information.
8. Use literal replies in SDP [Yes]
If enabled, some SDP result codes will have literal values instead of
numeric values.
9. Optional command line parameters []
Optional extra command line startup parameters for the iWRAP servers.
10. Edit startup script [/etc/bluetooth.conf]
Opens iWRAP configuration file (/etc/bluetooth.conf) for editing.
You can append extra iWRAP commands to that file. iWRAP servers process
the file each time they start. See the User’s and Developer’s Guide
for iWRAP command reference.
B.5.1. Bluetooth profiles
Submenu for the settings of all supported Bluetooth profiles.
1. Enable lan access profile [No]
Whether or not the LAN Access Profile is enabled.
2. Enable PAN user profile [No]
Whether or not the PAN User Profile is enabled.
3. Enable PAN generic networ king profile [No]
Whether or not the PAN Generic Networking Profile is enabled.
4. Enable PAN network access point profile [No]
Whether or not the PAN Network Access Point Profile is enabled.
5. Enable object push profile [Yes]
Whether or not the Object Push Profile is enabled.
6. Enable file transfer profile [Yes]
Whether or not the File Transfer Profile is enabled.
B.5.1.1. Lan access profile settings
Submenu containing LAN Access Profile settings.
1. Login name and password []
The login name and password required from LAN access clients. Must be entered
as a single string, separated with a space. For example: guest buffy
If empty (default), no login is required.
2. Service name (shown in SDP) [Lan Access]
148