User Manual

Appendix B. Setup Options
you have saved it. Later it is only shown encrypted, and there is no way
to decrypt it. You must either remember it or change it again to
something you do remember.
Use "-" do disable the password.
The password must match the authentication parameter in the "wpkg.pif"
file in the wpk packet. Otherwise the packet is not processed.
Syntax in the "wpkg.pif" file:
%wpkg-auth: auth
6. wpkgd hotplug password []
This is optional password to authenticate wpk installation packets
automatically run from USB memory dongles or Compact Flash memory cards.
The password is shown encrypted here, if set. By default, it is not set.
To change the password, clear the field, enter a new password and click Save.
Please note that the new password is shown in plain text only right after
you have saved it. Later it is only shown encrypted, and there is no way
to decrypt it. You must either remember it or change it again to
something you do remember.
Use "-" to disable the password.
The password must match the authentication parameter in the "wpkg.pif"
file in the wpk packet. Otherwise the packet is not processed.
Syntax in the "wpkg.pif" file:
%wpkg-auth: auth
7. Root user password for FTP [buffy]
Password of the "root" user for FTP connections.
8. Allow anonymous FTP login [Yes]
Whether "anonymous" FTP login is allowed or not.
9. WWW passwords [/etc/httpd.conf]
Access to WWW pages served by Access Server can be restricted using the
configuration file "httpd.conf", editable from here.
The file consists of lines in format "/dir:username:password". This
specifies that to view the WWW page at address "http://as-ip/dir", you
must enter username "username" and password "password".
More than one username can be defined for the same "/dir"
by adding multiple lines.
By default, this file specifies that only user "root" with password
"buffy" is allowed to access the WWW Setup.
136