User Manual

Table Of Contents

USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER

9.5.4 S

DPQUERY

The SDPQUERY command is used to send a Service Search Attribute Request to a connected

SDP server, identified with link_id. The command supports requesting for one attribute value

(specified with the attribute parameter, 4 hex digits, or a keyword) in all service entries

containing one UUID (specified with the uuid parameter, 4 hex digits, or a keyword), but

several requests can be sent during the same SDP connection. However, you must wait for the

reply to the previous reply before issuing new SDPSEARCH command.

The reply contains the response from the SDP server in encoded form. The code characters are

described in Table 8.

Command:

SDPQUERY link_id uuid attribute

Reply: SDPQUERY link_id info

Example: S: READY.

C: CALL 00:11:22:33:44:55 SDP

S: CALL 0

S: CONNECT 0 SDP

C: SDPQUERY 0 LAN DESCLIST

S: SDPQUERY 0 < < I 0004 < < U 0100 > < U 0003 I 04 > > > >

C: SDPQUERY 0 1102 0100

S: SDPQUERY 0 < < I 0100 S "Lan Access using PPP" > >

C: CLOSE 0

S: NO CARRIER 0 ERROR 000