User Manual

USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER
Core Specification 1.1 for more
information on params.
Defaults: 65535 40000
PPP AUTH Don't require any PPP authentication on
incoming connections.
PPP AUTH username
password
Require specified username:password
on incoming PPP connections.
PPP CHANNEL channel Our PPP (LAN Access Profile) channel.
This channel will be handled internally
by the Bluetooth server. If you change
this, remember to modify the SDP
record as well. Use zero value to disable
the LAN Access Profile.
PPP DEFAULTROUTE value This setting controls whether or not the
Bluetooth server should modify the
defaultroute setting. There are four
different modes:
0: Don't alter defaultroute
1: Set defaultroute according to
outgoing PPP
2: Set defaultroute according to
incoming PPP
3: Set defaultroute according to all PPP
calls
PPP WINHANDSHAKE seconds Timeout to wait for the Windows RAS
handshake.
PPP IP ipaddr/mask Set network IP range for PPP clients.
PAN ENABLE bitmap Controls incoming PAN connections.
Bitmap:
1: Allow incoming PAN-PANU
connection.
2: Allow incoming PAN-GN connection.
4: Allow incoming PAN-NAP connection.
For most cases value "6" (the default) is
recommended.
CONTROL PASSWORD Don’t require password from control
clients (default)
CONTROL PASSWORD pass Enable password. Control connection
clients must send this password before
giving any other command. The
password is case sensitive.
CONTROL PING seconds If enabled (seconds > 0), the Bluetooth
server will send a "PING" reply to all
control connection clients. You have to
reply to it with "PONG" or the
connection will be closed.
link_id MSC value Set MSC for link_id to value. See ETSI
TS 101 369 (GSM 07.10) for more
information.
Bluegiga Proprietary, Copyright © Bluegiga Technologies 2001-2004 60 (94)