User Manual

ManualsBrandsSilicon Laboratories Finland ManualsElectronicsMultiradio Access Server

Table Of Contents

USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER

9.3.5 S

The SET command allows you to alter various Bluetooth and server parameters. The supported

parameters are listed in Table 6. Issuing a SET command without parameters will list the

current settings.

Topic Name Value Description

BLUETOOTH BDADDR bdaddr Our bdaddr. This is a read-only value.

BLUETOOTH NAME friendly_name Set your friendly name. Others can

request this name with the NAME

command. There are following meta

characters you can use:

*: Hardware serial number, last three

digits

$s: Hardware serial number, last three

digits

$S: Hardware serial number, all digits

$p: Server port, last digit

$P: Server port

$h: hostname

$H: FQDN

$$: $

$*: *

The default value is $S_$p.

BLUETOOTH READABLE mode If enabled, some SDP result codes will

have literal values instead of numeric

values.

0: No (always use numeric values)

1: Yes (literal values)

BLUETOOTH CLASS value Set class-of-device value.

BLUETOOTH ROLE role {policy

{timeout}}

Set master/slave role switch preference,

optionally also link policy

and link supervision timeout. Possible

values for "role" are:

0: allow calling, don’t request when

answering

1: allow calling, request when

answering

2: don’t allow calling, request when

answering

The default link policy is 000f and the

default link supervision timeout is 7d00.

See Bluetooth Core Specification 1.1 for

more information on these.

BLUETOOTH ENCRYPT value Whether or not to use Bluetooth

encryption. To actually have Bluetooth

encr

tion enabled

the connection has