User Manual
Table Of Contents
- INTRODUCTION
- CONTROLLING THE ACCESS SERVER
- CONFIGURATION
- USING THE SYSTEM
- BLUETOOTH TECHNOLOGY OVERVIEW
- INTRODUCTION TO SDK
- INSTALLING THE WRAP SOFTWARE DEVELOPMENT ENVIRONMENT
- CREATING WRAP APPLICATIONS
- BLUETOOTH SERVER SOCKET INTERFACE
- I/O API
- ABOUT BLUEGIGA
- APPENDIX A – WRAP DIRECTORY STRUCTURE
USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER
8 CREATING WRAP APPLICATIONS
The fastest way to start developing WRAP applications is to study, change, and recompile the
example files in the asdk/src/examples directory.
8.1 A
PPLICATION EXAMPLES
To demonstrate the software development features of the WRAP, the WRAP Software
Development Environment comes with several example applications.
8.1.1 I
NSTALLING EXAMPLES
The compiled example files are located on the WRAP SDK tree in the file
asdk\src\examples\examples.tar.gz. The examples can be manually uploaded and installed on
the WRAP board.
Uploading can be done with SCP, FTP or X/Y/Zmodem. After uploading, the examples archive
needs to be unpacked with the "tar xzvf" command before the files can be used.
8.1.2 R
UNNING EXAMPLES
After the example files have been transferred to the WRAP, they can be run from the directory
into which they were unpacked. The examples, with their usage and purpose, are described in
Table 5. Note: The example WWW pages must be transferred to the correct place, where the
Web server can find them. In this user manual it is assumed that this has been done by giving
the command "mv www/* /var/www/html" in the directory where the examples.tar.gz –file
was unpacked.
Bluegiga Proprietary, Copyright © Bluegiga Technologies 2001-2004 45 (94)