User Manual
Table Of Contents
- INTRODUCTION
- CONTROLLING THE ACCESS SERVER
- CONFIGURATION
- USING THE SYSTEM
- BLUETOOTH TECHNOLOGY OVERVIEW
- INTRODUCTION TO SDK
- INSTALLING THE WRAP SOFTWARE DEVELOPMENT ENVIRONMENT
- CREATING WRAP APPLICATIONS
- BLUETOOTH SERVER SOCKET INTERFACE
- I/O API
- ABOUT BLUEGIGA
- APPENDIX A – WRAP DIRECTORY STRUCTURE
USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER
4.
Install toolchain sources (default: no - unless the tools directory was
changed)
Whether or not the toolchain sources will be installed. These are required only if the WRAP
tools directory was changed from the default target location in step 1.
5.
Install Linux headers (default: no - unless libc sources are selected)
Whether or not the Linux header files will be installed. These are required only if the libc
sources are being installed (chosen in step 5).
6. Install example applications (default: yes)
Whether or not the WRAP example applications and their sources will be installed.
7. Compile image after installation (default: yes)
If set to yes, install will compile the WRAP filesystem image to test that the installation
was successful and that the Development Environment is working correctly.
Bluegiga Proprietary, Copyright © Bluegiga Technologies 2001-2004 44 (94)