User Manual
Table Of Contents
- INTRODUCTION
- CONTROLLING THE ACCESS SERVER
- CONFIGURATION
- USING THE SYSTEM
- BLUETOOTH TECHNOLOGY OVERVIEW
- INTRODUCTION TO SDK
- INSTALLING THE WRAP SOFTWARE DEVELOPMENT ENVIRONMENT
- CREATING WRAP APPLICATIONS
- BLUETOOTH SERVER SOCKET INTERFACE
- I/O API
- ABOUT BLUEGIGA
- APPENDIX A – WRAP DIRECTORY STRUCTURE
USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER
DNS_1="10.1.1.1"
To configure WLAN to use encryption, add following lines (replace examples with your ESSID
and encryption key, which can be also shorter for 40/64bit encryption) to the file
"/etc/sysconfig/network.pcmcia"
0123456789abcdef0123456789"
ESSID="myessid"
After configuration, the WLAN interface comes up automatically when the WLAN card is
inserted. The WLAN interface is "eth1".
4.3.3 G
ENERAL CONFIGURATION
Standard set of wireless utilities are provided to fine-tune your WLAN configuration:
• iwconfig
• iwlist
• iwpriv
For more info see: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
4.4 S
ERVERS
The WRAP server applications are started automatically at system power-up or when needed
by the Bluetooth server or the Internet services daemon. The servers and their purposes are
described in Table 3.
Bluegiga Proprietary, Copyright © Bluegiga Technologies 2001-2004 27 (94)