User Manual
Table Of Contents
- INTRODUCTION
- CONTROLLING THE ACCESS SERVER
- CONFIGURATION
- USING THE SYSTEM
- BLUETOOTH TECHNOLOGY OVERVIEW
- INTRODUCTION TO SDK
- INSTALLING THE WRAP SOFTWARE DEVELOPMENT ENVIRONMENT
- CREATING WRAP APPLICATIONS
- BLUETOOTH SERVER SOCKET INTERFACE
- I/O API
- ABOUT BLUEGIGA
- APPENDIX A – WRAP DIRECTORY STRUCTURE
USER'S AND DEVELOPER'S GUIDE WRAP MULTIRADIO ACCESS SERVER
2 CONTROLLING THE ACCESS SERVER
There is no graphical user interface for the WRAP Multiradio Access Server. All controlling
operations to the Access Server must be done either by entering commands and using
applications at Access Server shell prompt or by sending and/or retrieving files to/from the
Access Server. There are several ways to access the shell prompt and to transfer files.
2.1 P
HYSICAL INTERFACES
The physical interfaces of the Access Server are described in Figure 1 and Figure 2.
Figure 1. WRAP Multiradio Access Server Connectors.
NOTE: The power adapter is the disconnection device, the socket-outlet shall be installed near
the equipment and shall be easy accessible. The power led (see Figure 2) is on when the
power adapter is connected.
Bluegiga Proprietary, Copyright © Bluegiga Technologies 2001-2004 10 (94)