User Manual

Chapter 3. Commands

"1"

One stop bit

"2"

Two stop bits

SET CONTROL ECHO

List format

SET CONTROL ECHO {echo_mask}

Set format

SET CONTROL ECHO {echo_mask}

echo_mask

Bit mask for controlling echo and events displaying

Bit 0

If set start-up banner is visible

Bit 1

If set characters are echoed back to client in command mode

Bit 2

If set events are displayed when in command mode

Default value for SET CONTROL ECHO is 7 (bits 0..2 set).

Warning

If every bit is set off (value 0) it is quite impossible

to know the status of ASCII Interface.

If Bit 2 is set off it is very hard to detect whether

ASCII Interface is in command mode or in data

mode.

SET CONTROL INIT

List format

SET CONTROL INIT {command}