User Manual

Bluegiga Proprietary Version 1.0
8
NTC: Normal Test Condition. Nominal power supply voltage (V
DD
= 3.3 V) and nominal operating
temperature (T
NOM
= 298 K = 25 ºC).
ETC: Extreme Test Condition. Extreme power supply voltages (V
DD
= 3.3 V ± 0.1 V) and extreme
operating temperatures (T
MIN
= 253 K = 0 ºC, T
MAX
= 328 K = 55 ºC) in all combinations.
5.2 R
ECEIVER CHARACTERISTICS
The receiver characteristics have been measured according to the test purposes of the Bluetooth test
specification. The details of the initial condition and the test procedure may be found from the
document mentioned above. The receiver characteristics are show in the table below.
No Item Min Typ Max Unit Bluetooth test purpose
1
Sensitivity.
Single slot packets.
-87 -82 -75 dBm RCV/CA/01/C. (NTC, ETC.)
2
Sensitivity.
Multi-slot packets.
-87 -82 -75 dBm RCV/CA/02/C. (NTC, ETC.)
C/I performance.
C/I
0MHz
. (Co-Channel) 11 dB
C/I
1MHz
. 0 dB
C/I
2MHz
. -30 dB
C/I
3≥MHz
.
-40 dB
C/I
IMAGE
. -9 dB
3
C/I
IMAGE+1MHz
. -20 dB
RCV/CA/03/C. (NTC.)
Blocking performance.
30 MHz…2000 MHz.
-10 dBm
2000 MHz…2400 MHz.
-27 dBm
2500 MHz…3000 MHz.
-27 dBm
4
3000 MHz…12.75 GHz.
-10 dBm
RCV/CA/04/C. (NTC.)
5
Intermodulation
performance.
-39 dBm RCV/CA/05/C. (NTC.)
+1 MHz 4 dB
+2 MHz -30 dB
>+3 MHz -40 dB
Image frequency -6 dB
dB
6
Adjacent (1 MHz) to in-
band image
-16
7 Maximum input level. -20 dBm RCV/CA/06/C. (NTC.)
Table 4: Receiver characteristics
NTC: Normal Test Condition. Nominal power supply voltage (V
DD
= 3.3 V) and nominal operating
temperature (T
NOM
= 298 K = 25 ºC).
ETC: Extreme Test Condition. Extreme power supply voltages (V
DD
= 3.3 V ± 0.1 V) and extreme
operating temperatures (T
MIN
= 253 K = 0 ºC, T
MAX
= 328 K = 55 ºC) in all combinations.