User's Manual
Table Of Contents
- 1. Key Features
- 2. Pinout
- 3. Interfaces
- 4. Module Software
- 5. Hardware Design Guidelines
- 6. Electrical Characteristics
- 7. RF Characteristics
- 8. Physical Dimensions and PCB Land Pattern
- 9. Soldering Recommendations
- 10. Tape and Reel Packaging
- 11. Certifications
- 12. Ordering Information
- 13. Support
- 14. Revision History
- Table of Contents
10. Tape and Reel Packaging
This section contains information regarding the tape and reel packaging for the Wizard Gecko WGM110 Wi-Fi Module including ship-
ment packaging information.
10.1 Tape Material and Dimensions
• Tape material: Polystyrene (PS)
• Tape length/reel: 53.4 m
•
Tape surface resistivity: 10
4
... 10
9
Ω/sq.
• Curvature of the tape / 100 mm of tape: Complies with EIA-481 standard
• Maximum radius of unmarked round corners: 0.2 mm
• Cumulative tolerance of any 10 consecutive sprocket holes: ± 0.2 mm
• Cover tape peel strength: The peeling force required to tear the cover tape from the carrier tape will fall within tthe range of 0.1
Newton to 1.3 Newton (10 to 130 grams) at peeling speed to 300 mm per minute. This complies with the EIA standard.
• Cover tape adhesion method: pressure sensitive
Figure 10.1. Tape Dimensions - Top View
Figure 10.2. Dimensions of the Module Slot on Tape
WGM110 Wizard Gecko Wi-Fi
®
Module Data Sheet
Tape and Reel Packaging
silabs.com | Smart. Connected. Energy-friendly. Rev. 1.2 | 30