User's Manual
Table Of Contents
- 1. Key Features
- 2. Pinout
- 3. Interfaces
- 4. Module Software
- 5. Hardware Design Guidelines
- 6. Electrical Characteristics
- 7. RF Characteristics
- 8. Physical Dimensions and PCB Land Pattern
- 9. Soldering Recommendations
- 10. Tape and Reel Packaging
- 11. Certifications
- 12. Ordering Information
- 13. Support
- 14. Revision History
- Table of Contents
8. Physical Dimensions and PCB Land Pattern
This section contains dimensional drawings of the WGM110 Module and the recommended application PCB land pattern dimensions.
The indicated dimensions apply for both WGM110A and WGM110E versions, the only difference physically being the u.Fl connector on
the WGM110E version.
8.1 Module Top View Dimensions
Figure 8.1. Top View Dimensions
Note: The clearance area indicated in the figure above is required only for WGM110A.
WGM110 Wizard Gecko Wi-Fi
®
Module Data Sheet
Physical Dimensions and PCB Land Pattern
silabs.com | Smart. Connected. Energy-friendly. Rev. 1.2 | 26