User's Manual

Digital terminals Min Typ Max Unit
Pulse width of pulses to
be removed by the glitch
suppression filter when
enabled
10 50 ns
6.4 Power-on Reset
The values indicated in the table below define the power-on reset signal characteristics for WGM110 Module.
Table 6.4. Power-on Reset Characteristics
Power-on Reset Min Typ Max Unit
Power-on reset threshold
(rising edge)
- - 1.96 V
6.5 Analog Digital Converter (ADC)
The values indicated in the table below define the ADC characteristics for WGM110 Module.
Table 6.5. ADC Characteristics
Power-on Reset Min Typ Max Unit
Input impedance 1 - - Mohm
Input voltage range (sin-
gle ended)
0 - Vref V
Common mode input
range
0 - VDDCPU V
Range of external refer-
ence voltage
1.25 - VDDCPU V
Resolution - - 12 bits
ADC clock frequency - - 13 MHz
Acquisition time (pro-
grammable)
1 - 256 ADC CLK cycles
Conversion time (6-bit) 7 - - ADC CLK cycles
Conversion time (8-bit) 11 - - ADC CLK cycles
Conversion time (12-bit) 13 - - ADC CLK cycles
Offset error (single-
ended)
- 0.3 - mV
Integral non-linearity - ±1.2 ±3 LSB
6.6 Power Consumption
The values indicated in the table below define the power consumption characteristics and the typical power consumption in practical
use cases respectively for WGM110 Module.
WGM110 Wizard Gecko Wi-Fi
®
Module Data Sheet
Electrical Characteristics
silabs.com | Smart. Connected. Energy-friendly. Rev. 1.2 | 20