User's Manual

Bluegiga Technologies Oy
Page 40 of 41
15.3 MIC Japan
WF111 has type approval for Japan with certification ID R 209- J00061
15.4 KCC (South-Korea)
WF111 has modular certification for Korean market with certification ID KCC-CRM-BGT-WF111
15.5 Qualified Antenna Types for WF111-E
This device has been designed to operate with the antennas listed below, and having a maximum gain of 2.14
dBi. Antennas not included in this list or having a gain greater than 2.14 dBi are strictly prohibited for use with
this device. The required antenna impedance is 50 ohms.
Qualified Antenna Types for WF111-E
Antenna Type
Maximum Gain
Dipole
2.14 dBi
Inverted F-antenna
2.2 dBi
Table 18: Qualified Antenna Types for WF111-E
Any antenna that is of the same type and of equal or less directional gain as listed in table above can be used
without a need for retesting. To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication. Using an antenna of a different type or gain more than 2.14 dBi will
require additional testing for FCC, CE and IC. Please, contact [e-mail] for more information.